Has my shaft been tipped? Shaft Measurements from raw tip to graphics

[mjhuffer]

Project X Hzrdus Smoke RDX Black Hybrid - from tip to W in HEXTOW is 5.75"

Project X Hzrdus Smoke RDX Black Wood - from tip to W in HEXTOW is 5.75"

Project X Hzrdus Smoke Black Hybrid (2nd Gen) - from tip to E in SMOKE is 17.3125"

Project X Hzrdus Smoke Black (2nd Gen) - from tip to E in SMOKE is 20.25"

Project X Hzrdus Black Gen 4 Wood - from tip to middle of N in DESIGN is 5"

Edited February 22, 2023 by mjhuffer

[CKaneb]

Would people be happy if I made a Google Sheet to this that has everything in one place instead of making it be a 3-page thread? Will literally just be taking the data from here and putting it in a spreadsheet divided by OEM

[Stuart_G]

6 hours ago, CKaneb said:

Would people be happy if I made a Google Sheet to this that has everything in one place instead of making it be a 3-page thread? Will literally just be taking the data from here and putting it in a spreadsheet divided by OEM

 

Most who manage these types of threads will periodically update / edit the first/original post with the data added in the later pages.

 

Whether that's in spread sheet form or not doesn't matter (at least to me 🙂 ).

 

Edited February 20, 2023 by Stuart_G

[CKaneb]

On 7/30/2019 at 5:32 PM, The General said:

OG Redboard 18.75" tip to "N" in Rayon

OG Blueboard 20.75" tip to "N" in Rayon

do you or anyone else by chance have the measurements for an OG Whiteboard? both 72 X and 83 X

[jmkorting]

Anyone know how to tell how much a VA Composites shaft has been tipped?  In particular a VA Vylyn wood shaft.

[AvgSlicer]

Bought a tour ad Di 7s (new graphics) off someone after finding this thread. 
just measured from the end of ping adapter to first green ring and it measures 22.5” so does this mean it was tipped more than 2”? Thanks!

[third-times-a-charm]

UST LIN-Q Purple - 22 7/8" from the tip to the silver smaller Lin-Q logo on the side of the shaft

Project X Evenflow RIPTIDE Hybrid (Small Batch) - 17 3/4" from the tip to the Y in HY 

[third-times-a-charm]

10 hours ago, AvgSlicer said:

Bought a tour ad Di 7s (new graphics) off someone after finding this thread. 
just measured from the end of ping adapter to first green ring and it measures 22.5” so does this mean it was tipped more than 2”? Thanks!

Yes, I would return it. Thats a tomato stake.

[AvgSlicer]

10 hours ago, third-times-a-charm said:

Yes, I would return it. Thats a tomato stake.

Haha sure feels like it

[rbpwrx]

On 7/8/2023 at 12:47 PM, AvgSlicer said:

Bought a tour ad Di 7s (new graphics) off someone after finding this thread. 
just measured from the end of ping adapter to first green ring and it measures 22.5” so does this mean it was tipped more than 2”? Thanks!

let me know if u want to sell it

[Golfsaved hmm ruinedmylife]

On 9/6/2022 at 5:04 PM, AUS_backintheswing said:

Does anyone know a tip to graphics measurement  for an uncut KBS TD 60 and 70 category 3?

Did you ever happen to find the measurements? I have a 70 cat 4 but I would think they must be the same 

[jgreer1421]

How about a Kai’li white 60TX?

[Jika]

Hi all would anyone have the measurement on this Matrix Shaft out of a Cleveland Driver?

[skmiec4]

Not sure how I didn’t see this thread before but very helpful 

[kaspermk]

Hi,

 

Does anyone know the tip to graphics measurement of an aldila rouge black 95 tx hybrid shaft (the newest version). Thanks.

 

 

 

 

[HillbillyHoma]

Just purchased a used 5 wood Oban White shaft. It measures 24 1/8 from tip to the first gold ring. How much has it been tipped?

[rbpwrx]

Anyone know EvenFlow RIPTIDE measurements (wood)?

 

Edited November 8, 2023 by rbpwrx

[rbpwrx]

BTW, tip-to-graphics on a HZRDUS Smoke Green *iM10* wood is 22.5" to the tip-end of the O in SMOKE, or 26.5" to the end of the S in HZRDUS.

 

 

 

[enfuego]

6 hours ago, rbpwrx said:

Anyone know EvenFlow RIPTIDE measurements (wood)?

 

probably different but Evenflow RIPTIDE CB (blue shaft) tip to graphics is 20 3/8"

Edited November 8, 2023 by enfuego

[rbpwrx]

1 minute ago, enfuego said:

probably different but Evenflow RIPTIDE CB (blue shaft) tip to graphics is 20 3/8"

 

Thanks, do you know what part of the graphics? The tip-end of the 'B?'

[gtnap]

Does anyone have the measurement for a Diamana GT? Thanks!

[enfuego]

5 hours ago, rbpwrx said:

 

Thanks, do you know what part of the graphics? The tip-end of the 'B?'

 

From the uncut tip to the G for grams.

 

 

3 hours ago, gtnap said:

Does anyone have the measurement for a Diamana GT? Thanks!

 

Diamana ZF is 18 1/4" from the uncut tip to the L in CHEMICAL

[rbpwrx]

Anyone know MMT tip-to-graphics?
Got a 105TX 3i here, want to know if it's been tipped.

Thx!

[jmkorting]

Graphite Design Tour AD DI hybrid shaft w/ new graphics, anyone have info available how to tell tipping?  Same as old graphics?  Saw post for old graphics, but nothing on one with new graphics.

[HillbillyHoma]

17 hours ago, jmkorting said:

Graphite Design Tour AD DI hybrid shaft w/ new graphics, anyone have info available how to tell tipping?  Same as old graphics?  Saw post for old graphics, but nothing on one with new graphics.

An untipped new graphic AD DI hybrid shaft will measure 20 7/8" from tip to the first ring. 

 

 

Edited December 14, 2023 by HillbillyHoma

[jgreer1421]

Anyone know a VA Raijin Black measurements?

[Bryanw99]

Looking for a measurement on a Tour AD VR 6s with a Taylormade adapter. I’m getting 25 3/8” to the first ring from end of adapter 

[GQ0208]

On 8/26/2021 at 3:58 PM, geochitown said:

Fujikura Ventus HB hybrid shaft tip to graphic is the same as the driver shafts,

4" from the tip to the final "e" in Velocore.

Are you 100% sure on this? I bought a used Ventus Blue HB shaft and from the ‘E’ to the point in the adapter where the shaft would end is 4.75”. This makes me nervous that mine might not be legit. 

[third-times-a-charm]

40 minutes ago, GQ0208 said:

Are you 100% sure on this? I bought a used Ventus Blue HB shaft and from the ‘E’ to the point in the adapter where the shaft would end is 4.75”. This makes me nervous that mine might not be legit. 

4" is raw shaft. An adapter would add length.

[GQ0208]

11 minutes ago, third-times-a-charm said:

4" is raw shaft. An adapter would add length.

I am measuring to the point in the adapter where the shaft ends and not the end of the adapter. Hence my concern of the 4.75”.