👨‍🦯 This post is making me Xtra Stiff 👨‍🦯 - Mizuno JPX 921 Tour DG TI X100, Tensei 1K Black 65x, KBS $ Taper 130 Pulls, Ping Tour 65x

[zojo]

One set of irons, and lots of iron shafts as I was going through a long stage of tinkering with a variety of setups at the end of last year. Need to get rid of these before the wife finds the stash! Please see pictures for measurements with the ruler - I assume 0.25" for grip butt cap and 1.25" for iron heads as a baseline. Prices include Paypal and shipping. No trades please, only looking for cash at this time

 

1. Mizuno JPX 921 Tour 4-PW - DG Tour Issue X100 Shafts - 1/2" Over Std - BB&F Ferrules - MMC Plus 4 Standard Grips - $700 shipped
2. 4-PW KBS $-Taper Shafts - 130g X Stiff - Z Grip Cords - 1/2" Over Std - .355 - $OLD
3. 4-PW KBS $-Taper Shafts - 130g X Stiff - Superstroke S Tech - 1/2" Over Std - .355 - $OLD
4. 4-PW KBS C-Taper Shafts - 130g X Stiff - No Grips - Std Length - .355 - $200 shipped
5. 4-PW DG TI XSeven Shafts - X Stiff -  Z Grip Cords - 1" Over Std - .355 - $OLD
6. 4-PW DG TI XSeven Shafts - No Grips - 1/2" Over Std - .355 - $OLD
7. 4-PW DG TI X100 Shafts - Z Grip Cords - 1/2" Over Std - .355 -$OLD
8. Ventus Black 10TX HB - .370 - $OLD
9. Ping Tour 65 X Shaft - G400 Tip - $OLD
10. Mitsubishi Tensei 1K Black 65 X Stiff - Titleist Tip - Iomic Sticky 2.3 - $OLD

     

 

1. Mizuno JPX 921 Tour 4-PW - DG Tour Issue X100 Shafts - 1/2" Over Std - BB&F Ferrules - MMC Plus 4 Standard Grips - $700 shipped

I really really wanted these to work, but ended up going with the Mizuno Pro 221s and different set of shafts. The heads are in great shape, no browning at all and minimal chatter. The X100s play around 1/2" over standard (38.5" 5 iron) and the heads play at 2 degrees upright. DM me if you want any specific pictures. Will ship in a blue Mizuno box.

 

2. 4-PW KBS $-Taper Shafts - 130g X Stiff - Z Grip Cords - 1/2" Over Std - .355 - $OLD

These were pulled from the above JPX921s through some minor experimenting. They all have standard sized Z Cord grips, but the 7 iron has a midsized Z Cord grip, as I was doing some testing. These should play roughly 1/2" over standard, 37.25" 5 iron

 

3. 4-PW KBS $-Taper Shafts - 130g X Stiff - Superstroke S Tech - 1/2" Over Std - .355 - $OLD

Another set of $ taper shafts that I thought I was going to put into a backup set of irons, but just didn't work for me. 4-9 have Superstroke S Tech grips, and the PW has a golf pride tour velvet grip. Grips have some wear - I was always planning on replacing these anyway once installed but never got around to that. These should play roughly 1/2" over standard, 37.25" 5 iron

 

4. 4-PW KBS C-Taper Shafts - 130g X Stiff - No Grips - Std Length - .355 - $OLD

Set of KBS 130 C tapers, tips are in good shape. Shaft labels show some wear. No grips on these guys, and they are standard length 36.5" 5 iron - was planning on soft stepping them once to get them +0.5" playing length to match my old gamers.

 

5. 4-PW Dynamic Gold Tour Issue XSeven Shafts - X Stiff -  Z Grip Cords - 1" Over Std - .355 - $OLD

Bought these with the intent of cutting them down to my specs, but then found a set of X7's that were the correct length. Got them as one time pulls but never installed them on my end. They have Z Cord Grips and will play a little over 1" over standard, 37.875" 5 iron

 

6. 4-PW Dynamic Gold Tour Issue XSeven Shafts - No Grips - 1/2" Over Std - .355 - $OLD

Did some testing with the 7 iron on these, and they just weren't for me. These netted out at 1/2" over length when installed with grips, 37" 5 iron. Tip weights are still installed (can't remember actual weights), tips are prepped.

 

7. 4-PW Dynamic Gold Tour Issue X100 Shafts - Z Cord Grips Standard - 1/2" Over Std Length - .355 - $OLD

Set of Dynamic Gold TI X100 shafts that play 1/2" over standard, 37.25" 5 iron. These have standard Z Cord Grips. I did not get a chance to remove the old ferrules on these, and some of these do not have tip weights . Labels are still in great shape.

 

8. Ventus Black 10TX HB - .370 - $OLD

I bought 2 of these with the intent of installing into a Mizuno Pro Fli Hi 2 iron and 3 iron. Installed in a 3 iron and never really got around, or felt the need to put in a 2 iron so selling the shaft here. Measures 42" from butt to tip.

 

9. Ping Tour 65 X Shaft - G400 Tip - Z Cord Align Grip - $OLD

There's a long story to this shaft, but essentially I went on a trip to Ireland a couple years ago and my driver shaft was damaged during the flight. Got to Lahinch and the driver snapped on the first tee. The guys at Lahinch hooked me up with a clubmaker in Killarney, who built out this as a replacement and delivered it to me at 9pm at the pub later that night - incredible service that helped kept the trip going. Anyway, I got a replacement shaft back in the states for my G400, and no longer require the services of this shaft. Alignment on the grip is lined up to the small minus setting on the adapter. 44" grip to tip, I believe it plays 44.75" in a G400.

 

10. Mitsubishi Tensei 1K Black 65 X Stiff - Titleist Tip - Iomic Sticky 2.3 - $OLD

This came with a new TSR2 that I ordered, but then I swapped out the shaft for my preferred Diamana. Pretty much unused condition, as it's been sitting in my garage, brand new blue Iomic grip.

 

 

pin 4/27

Edited May 8, 2023 by zojo

[blakesmittkamp]

so many stiffies 

[Nard_S]

Message sent on $Tapers w/ z-cord.

[Its_KBO.]

Pm sent on x7

[zojo]

Lots of shafts sold, all PMs replied to. Ad has been updated with what's available - please send through an offer and we can get the rest of these moved!